HP Matrix Operating Environment 7.2 Update 1 Infrastructure Orchestration User Guide

orchestration with server deployment options. However, infrastructure orchestration can be

configured to use both deployment servers, but this configuration must be done after installation

is complete.

If you want to add a deployment server after infrastructure orchestration is installed, enter the

following commands on the CMS.

NOTE: If you copy and paste these commands, be sure to enter the dash (minus) key. In some

cases, copying and pasting results in characters that appear to be the same but are incorrect.

• Insight Control server deployment

mxnodesecurity –a –p dsc_rdp –c username:password -t on -n <ipaddress

of server deployment server>

• Insight Control server provisioning

mxnodesecurity -a -p dsc_sas -c username:password -t on -n <ipaddress

of server provisioning server>

• Ignite-UX

mxnodesecurity –a –p dsc_ignite –c username:password -t on -n

• HP Server Automation (SA):

mxnodesecurity –a –p dsc_sas –c username:password -t on -n <ipaddress

of HP Server Automation server>

Configuring Insight Control server deployment

Creating server deployment job folders

Create Insight Control server deployment job folders for each operating system that infrastructure

orchestration uses to deploy physical servers.

NOTE: ESXi deployment is not supported in Matrix infrastructure orchestration using Insight

Control server deployment.

1. Create a top-level Insight Control server deployment job folder for each operating system.

Right-click in the empty space of the Jobs panel and select New Folder from the list.

2. Rename the new folder, for example, HPIO RHEL54 BL BFS.

3. Copy the Deploy ProLiant System Configuration (BL BFS) job from the HP

Deployment Toolbox/2→Hardware Configuration folder, and paste it into the new folder.

4. OS jobs can be found under OS Installation→Hardware Configuration (or under HP Deployment

Toolbox/3B→OS Imaging if customized OS images were already captured); HP management

agent jobs can be found under HP Deployment Toolbox/4→Software which should be installed

after the OS is deployed.

For example, in the HPIO RHEL54 BL BFS job folder highlighted in the following figure, enter

the following:

• 01 in front of the first job, Deploy ProLiant System Configuration (BL BFS);

• 02 in front of the second job, DeployRHEL 5.4 x64 (EN-US);

• 03 in front of the third job, Install HP Management Agents for RHEL 5 x64

For Direct-Attached Storage (DAS) OS deployment, do not include the Deploy ProLiant System

Configuration (BL BFS) job in the job folder.

32 Installation and configuration