HP Process Resource Manager User's Guide

PRM error messages
prmconfig error messages
Appendix G 265
296
Message Unable to change the polling interval of the
%s manager: (HP-UX error message)
Cause You are not running as root, the manager is no longer
enabled, or an internal system failure.
Action Log in as superuser and try again or check that the
manager is running. If it is running, see if using
prmconfig -r resolves the problem. Be sure to load a
configuration and enable the resource manager after
resetting PRM. Also, ensure that no other superusers
are simultaneously changing the configuration with
prmconfig, the SMH interface, or the SIM interface.
Take action based on the HP-UX error message. If
problem persists, contact system support staff.
297
Message Interval must be an integer more than 0 and
less than %d.
Cause An invalid interval was specified.
Action Check prmconfig -I usage.
298
Message Unable to change logging status of the %s
manager.
Cause Manager is no longer enabled or an internal system
failure.
Action Check that the manager is running. If it is running,
see if using prmconfig -r resolves the problem. Be
sure to load a configuration and enable the resource
manager after resetting PRM. Also, ensure that no
other superusers are simultaneously changing the
configuration with prmconfig, the SMH interface, or
the SIM interface. If problem persists, contact system
support staff.