HP-UX SNAplus2 R7 Administration Guide

Appendix AConfiguration Planning Worksheets
Motif Field Valid Entry/Notes Your Implementation Value
MAC address Hexadecimal digits
If the remote end of this link is a VTAM host,
you can find its MAC address in the
MACADDR= parameter of the VTAM Port defi-
nition.
If you are configuring a link to an AS/400
system, the MAC address is the ADPTADR pa-
rameter in the Line Description.
SAP number
Hexadecimal (multiple of 4)
If the remote end of this link is a VTAM host,
the SAP number is the SAPADDR= parameter
of the VTAM PU definition.
If you are configuring a link to an AS/400 sys-
tem, the SAP number is the SSAP parameter in
the Line Description.
A.2.5 QLLC (X.25)
Complete this worksheet to support connectivity using the QLLC (X.25) link protocol.
Motif Field Valid Entry/Notes Your Implementation Value
QLLC Port Dialog
SNA port name
Up to 8 characters
X.25 card number 0 to number_of_cards_minus_1
Port number 0 to number_of_ports_on_card_minus_1
Initially active
Select if needed
Match incoming X.25
address
Local X.25 sub-address
QLLC Link Station Dialog
Link station fields
Name
Up to 8 characters
SNA port name
Up to 8 characters
Activation By administrator
On node startup
On demand
LU traffic Any
Independent only
Dependent only
Independent LU traffic
184