HP-UX SNAplus2 R7 Administration Guide

Appendix AConfiguration Planning Worksheets
A.3 Passthrough Services Worksheets
Complete worksheets for any of the passthrough services described in the following sections, if the service is to be
supported by the local node:
• Section A.3.1,
DLUR on the Local Node
• Section A.3.2, Passthrough DLUR for Downstream Nodes
• Section A.3.3, PU Concentration
• Section A.3.4, TN Server
A.3.1 DLUR on the Local Node
Complete this worksheet to support DLUR on the local node.
Motif Field Valid Entry/Notes Your Implementation Value
Node Configuration: See Section A.1, Node Worksheets.
Connectivity Configuration: See Section A.2, Connectivity Worksheets. To support DLUR on the local node,
configure connectivity to the APPN network.
DLUR PU: .
PU name
1–8 type A EBCDIC characters
DLUS name
NETNAME.LUNAME (each 1–8 type A
EBCDIC characters)
Backup DLUS name This parameter is optional.
NETNAME.LUNAME (each 1–8 type A
EBCDIC characters)
PU ID
8 hexadecimal digits
In a VTAM configuration, the first three digits
should match the IDBLK parameter in the PU
definition, and the last five digits should match
the IDNUM setting.
On an AS/400 system, the PU ID is configured
in the EXCHID parameter.
Initially active
Select if needed
Compression supported
Select if needed
Retry contacting DLUS
indefinitely
Select if needed
Local LU and Application Configuration: See Section A.4, User Application Support Worksheets. You must
configure local dependent LUs and any application support you require.
A.3.2 Passthrough DLUR for Downstream Nodes
If the local node is an APPN network node, you can provide passthrough DLUR services for downstream nodes.
Complete this worksheet to support DLUR.
187