HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Workstation Configuration
RJE Style File Records
Chapter 6140
logon_text
The logon string required by the host Job Entry
Subsystem. This string must be specified if the
send-logon parameter below is set to YES. Check with
your host Job Entry Subsystem personnel to determine
the correct string to use. If send_logon is set to NO,
this parameter must not be specified.
send_logon
Specifies whether the RJE workstation sends its logon
string to the host to initiate RJE startup, or waits for
the host to initiate the startup.
Allowed values:
YES
The workstation sends a logon
message to the host as soon as the
SSCP session is established. The
logon_text parameter must be
specified.
NO
The workstation waits for a BIND
message from the host, and does not
send the logon string. The
logon_text parameter must not be
specified.
Check with your host Job Entry Subsystem personnel
to determine the correct option to use.
inbound_compression
Specifies whether job files submitted to this
workstation are to be compressed for transfer to the
host. Compression can improve the overall processing
time for a job if you are sending large files containing
sequences of repeated characters; that is, more than
four of the same character (including the space or null
characters) in succession.