HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Workstation Configuration
RJE Style File Records
Chapter 6 149
form_name
A name identifying this Forms Control Buffer. This
name should not match any other form_name in the
style file. If you include two Forms Control Buffers with
the same name, only the second definition will be used.
form_length
The page length used to format the output data,
specified by the number of lines the printer can print
on each page. Specify a value in the range 1 - 255.
first_line
The line number (within the specified page length) on
which the first line of data should be printed. This
determines the top margin on the printed page. For
example, 1 specifies no top margin (print on the first
printable line of the page), and 5 specifies a top margin
4 lines deep.
Specify a value from 1 to the number of lines specified
by the form_length parameter above.
last_line
The line number (within the specified page length) on
which the last line of data should be printed. This
determines the bottom margin on the printed page. For
example, on a 66-line page, 66 specifies no bottom
margin (print down to the last printable line of the
page), and 62 specifies a top margin 4 lines deep.
Specify a value between the values of the first_line
and form_length parameters above.
channel_2 - channel _12
Vertical channel positions 2 to 12 specify “vertical
tabs”— specific positions on the page at which data can
be printed. When the data form the host contains the
control code “go to vertical channel n ”, the line number
specified here for that vertical channel determines the
position on the page at which subsequent data will be
printed.