HP-UX SNAplus2 RJE User's Guide

SNAplus2 RJE Workstation Configuration
Configuring RJE Workstation with xsnapadmin
Chapter 6158
Configuring RJE Workstation with
xsnapadmin
In addition to using snaprjecust and the text style file to configure the
workstation, you must define some parameters with xsnapadmin. This
information is stored in the SNAplus2 configuration file, which is set up
and maintained by the system administrator and contains information
that is required for RJE communications. For additional information, see
the HP-UX SNAplus2 Administration Guide.
Workstation Configuration Information
The following parameters must be defined for the RJE workstation:
workstation name
The name of the workstation (maximum of 4
characters).
primary user
The user ID of the main user of this workstation. This
must be a valid user ID on the server or client on which
this workstation will run and a valid ID in the group
for this workstation.
group name
The group name of the users who use this workstation.
This must be a valid group name for this workstation.
system name
The name of the HP-UX server or client on which this
workstation will run.
LU name
Names of the LUs that this workstation uses.