Installing SoftBench
Installing SoftBench
Loading the SoftBench Software
Chapter 222
Loading the SoftBench Software
1. Become the root user on the target (destination) system.
2. If you are installing SoftBench from an HP-UX Application CD, a
codeword is required to copy the software from the CD. This is not
required if you are installing from a software depot.
Refer to “Enter CD Installation Codeword” on page 17 for
instructions.
3. Mount the SoftBench CD. You can mount the disk with sam(1M) or
mount(1M).
4. Execute swinstall.
5. Depending on the version of swinstall you are using, you may need to
select a target system before you can view and mark the software
bundles to be installed.
If the Target Selection window appears, use the following steps to
select a target:
a. In the Target Selection window, select the line with your
hostname.
b. Use the menu "Actions:Mark for Install" to mark the target.
c. Use the menu "Actions:Show Software for Selection…" to
bring up the Software Selections window.
6. From the Software Selection window in swinstall, select a bundle
you want to install, and then use the menu "Actions:Mark For
Install" to mark the bundle. Table 2-1 lists the names of product
bundles you may choose.
Table 2-1 SD Bundle Names of SoftBench Products
Product to Be
Installed
HP 9000
Workstation SD
Bundle
HP 9000 Server
SD Bundle
C SoftBench B6449EB B6445EB
Japanese C SoftBench B6450EB B6446EB