Installing SoftBench

Installing SoftBench
Loading the SoftBench Software
Chapter 2 23
7. Once you have marked the bundle you wish to install, proceed with
the analysis phase of swinstall. Choose the menu "Actions:Install"
or "Actions:Run This Job", depending on which menu is available
in the version of swinstall you are using. (You should see one or the
other menu — but not both.)
For more detailed instructions, refer to the online help in swinstall.
8. Click Logfile to check the logfile after the analysis phase is complete,
Correct any errors before clicking OK to continue with the
installation. Check the logfile again after the installation is complete.
If errors occur, refer to “Correcting Installation Problems” on page 25
for more information.
9. Exit swinstall.
C++ SoftBench B6451EB B6447EB
Japanese C++
SoftBench
B6452EB B6448EB
SoftBench CM server
only
To install the SoftBench CM server without
SoftBench, use the instructions in
“Selecting the SoftBench CM Server
Without SoftBench” on page 24.
Table 2-1 SD Bundle Names of SoftBench Products
Product to Be
Installed
HP 9000
Workstation SD
Bundle
HP 9000 Server
SD Bundle