Administrator's and User's Guide for SFM HP-UX 11i v3 September 2012

In addition, the support for CPUIndicationProvider and MemoryIndicationProvider has been added
with additional support for hardware events on HP Integrity BL860c i2, BL870c i2 &
BL890c i2 Server Blades. The support for MemoryIndicationProvider has been added for
Legacy memory events and that for MemoryIndicationProviderIA for HP Integrity BL860c
i2, BL870c i2 & BL890c i2 Server Blades, HP Integrity Superdome 2 and
rx2800 i2 servers. For the listing of new events reported by SFM on these indication providers,
see the SFM Event Descriptions.
CIMOM identifies the SFM providers using SFMProviderModule. If a provider is not working
properly, SFMProviderModule stops all the SFM providers.
Table 3 Instance / Indication providers support
IA NGIS providers
2
IA legacy provider
1
PA-RISC providerInstance / Indication providers
√√√CPUProvider and
CPUStatusProvider
√√
Supported only on BL860c
i2, BL870c i2 & BL890c i2
ХBladeProvider and
BladeStatusProvider
ХХ√EMDProvider
√√√Environmental
√
Not supported on HP
Superdome 2
√
Supported only on BL860c
i2, BL870c i2 & BL890c i2
√MemoryProvider and
MemoryStatusProvider
√√
Supported only on BL860c
i2, BL870c i2 & BL890c i2
ХEnclosureProvider and
EnclosureStatusProvider
√√√MPProvider and MPStatusProvider
√√√CSChassisProvider
√√√RecordLogProvider
√
Not supported on HP
Superdome 2
√√FRUProvider
Х√√EMSWrapperProvider
√√ХEvmCimProvider
√√√SFMIndicationProvider
√
Not supported on HP
Superdome 2
√XMCAIndicationProvider
√√√TemperatureSensorInstanceProvider
√√√FirmwareRevisionProvider
X√√StateChangeIndicationProvider
1
Legacy : HP Integrity platforms supporting processors prior Intel 9300.
2
NGIS : HP Integrity platfroms supporting Intel 9300 processors and Intel Itanium 9500 Processor Series
Table 4 (page 15) lists the mapping between provider module and provider.
14 Introduction