HP-UX SysFaultMgmt (System Fault Management) (SFM) Release Notes (766969-001, March 2014) (Edition: 2)

This problem has the following two solutions:
◦ Use the Onboard Administrator to determine the total number of blades on the system.
◦ Disable SFMProviderModule using the cimprovider -dm SFMProviderModule
command. Run mv /var/opt/sfm/data/sdrcache /tmp/sdrcache command to
move the sdrcache file and enable SFMProviderModule cimprovider -em
SFMProviderModule
• Problem:
CIM_AlertIndication.NetworkAddresses does not contain all assigned IP addresses.
Description:
Indication delivered by SysFaultMgmt (System Fault Management) (SFM) does not display
all the IP addresses in NetworkAddresses property of CIM_AlertIndication class when a new
IP address is configured or an old IP address is changed at runtime.
Workaround:
To reflect newly configured IP Addresses in SysFaultMgmt (System Fault Management) (SFM)
Indication, disable and enable SFMProviderModule using the following commands
cimprovider -dm SFMProviderModule
cimprovider -em SFMProviderModule
• Problem:
The firmware version of Management Processor firmware (MFW), given by MPProvider and
FirmwareRevisionProvider on HP Integrity rx2800 i2 server may be incorrect.
Description:
The revision number (third field in':' separated version string) may be incorrect.
Workaround:
Run sysrev command from MP to get the correct MFW version.
• Problem:
The WBEM events do not get delivered to evweb.
Description:
In an exceptional scenario, due to extreme stress condition, the database component can get
into a deadlock. In such cases, no events can be stored to database and hence evweb cannot
show any WBEM indication.
Workaround:
Manually kill SFMProviderModule process and restart SFMProviderModule using the following
command:
cimprovider -em SFMProviderModule
• Problem:
After OE install, SysFaultMgmt (System Fault Management) (SFM) generates harmless
warning messages in the install log file.
Description:
The following messages are generated:
PGS04838: Warning: Class HP_CommonRecordLog already exists in the repository
PGS04838: Warning: Class HP_CommonLogRecord already exists in the repository
This message is written to the log when a module is registered to the class ahead of
SysFaultMgmt (System Fault Management) (SFM). This is a warning message which indicates
that the class is already registered.
24 Known problems, workaround, and limitations