Quick Start Guide

Common Errors
Note:
The currently selected configuration does not contain any environments. You may want to select another
configuration.
Diagnosis: The default configuration does not have an OE depot in it.
Correction: This does not affect the configuration you created. Select the cfg clause you created as described
above.
7. Configure your client's installation using the Ignite-UX itool TUI. Modify the fields of the
configuration interface at your discretion. Navigate the TUI using the tab to move around
and by pressing enter to make selections. You can use shortcut keys (indicated with an
underline) to make a selection, but they do not work when the cursor is positioned at an
input field. Using shortcuts can significantly reduce the time required to navigate the TUI
itool.
Not all fields in the configuration interface require attention. In fact, a quick installation can
be launched by accepting the default configuration for your version of HP-UX and then
clicking Go!.
At a minimum, you might want to define the root password, set the time zone, and set the
DNS configuration information.
a. Navigate to the System tab.
Install HP-UX from the Server Using the Client Console 29