HP Integrity Virtual Machines Installation, Configuration, and Administration Version A.03.50

addresses, and to make sure that the proper bits are set. You can specify the bus and

device with the MAC address, or the MAC address without the bus and device, or you

can omit the entire hardware address. If you do not specify the virtual network device

hardware address, or a portion of it, the missing information will be generated

automatically. If you specify only a portion of the virtual network device hardware

address (for example, just the MAC address), you must include the commas (for example

,,aa-bb-cc-00-11-22).

The virtual switch information consists of the following fields, separated by a colon:

• vswitch

• vswitch-name (the name assigned to the virtual network switch)

• portnumber (the number of the port on the vswitch)

The following example shows how to associate a guest virtual network device with a vswitch:

network:avio_lan:0,1,02-02-03-04-05-06:vswitch:net1

• The guest virtual network device type is network.

• The virtual adapter type is avio_lan.

• The virtual PCI bus number is 0.

• The virtual PCI slot number is 1.

• The virtual MAC address is 02-02-03-04-05-06.

• The physical network device type is vswitch.

• The vswitch name is net1.

AUTHORS

HP Integrity Virtual Machines was developed by HP.