User Guide

2 Setting Up the Printer
Checking the Packing List
Save the packing materials in case you need to repack the printer for shipping or storage. Before
installation, check that all the items listed below have been shipped.
●
Printer
●
Starter roll of receipt paper
●
Test printout
●
USB power cable (some models); power cable (some models); power adapter (some models),
serial/USB cables (some models)
●
HP Point of Sale System Software and Documentation disc
Loading or Changing the Receipt Paper
Before setting up the receipt printer, ensure power is turned off to the printer, POS computer and
other attached devices.
CAUTION: You must use qualified paper rolls with the HP printers. The list of qualified paper is in
Technical Specifications on page 22. Using unqualified paper may void the warranty.
You will later use the same procedure to change the receipt paper as you will to load it during
installation. The minor difference is noted in the directions below.
1. Open the receipt cover by pushing up on each side of the cover (1) until it unsnaps.
4 Chapter 2 Setting Up the Printer