User Guide

Print Size
Character sizes for the standard and compressed mode:
● Standard
15.6 characters per inch
44 characters per line
13 x 24 dots cell size
●
Compressed
20.3 characters per inch
56 characters per line
10 x 24 dots cell size
Ordering Thermal Paper
The printer requires qualified thermal paper with the following dimensions:
Width Diameter Length
80 ± 0 .2 mm (3.15 ± 0.01 in.) 90 mm max. (3.54 in.) 98 meters (322 ft.) nominal
The above figures are based on a core diameter of 22 ± 0 .5 mm (0.87 in.) outside, 11.5 ±0 .5 mm
(0.45 in.) inside.
The paper must not be attached at the core. Use paper with a colored stripe at the end to indicate
that the paper is running low, required when the printer is positioned vertically.
Qualified Paper Grades
The following paper grades produced by their respective manufacturers are recommended. There are
a number of paper converters qualified to provide this paper, provided the POS rolls are from these
recommended grades.
To order paper rolls, contact your converter of choice.
24 Appendix B Technical Specifications