HP BladeSystem c-Class Virtual Connect Support Utility Version 1.3.1 Release Notes

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect 1/10Gb-F Ethernet Module for c-Class BladeSystem

HP BladeSystem c-Class Virtual Connect Support

Utility Version 1.3.1

Release Notes

Part Number 506693-001

October 2008 (First Edition)

Summary of content (8 pages)

PAGE 1
HP BladeSystem c-Class Virtual Connect Support Utility Version 1.3.
PAGE 2
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software.
PAGE 3
Contents Important notes and recommendations ............................................................................................ 4 New features ............................................................................................................................... 5 General requirements .................................................................................................................... 6 Resolved issues..........................................................................
PAGE 4
Important notes and recommendations • Due to a change in the installation method for HP 4Gb Virtual Connect Fibre Channel firmware version 1.11, HP recommends using this version of the Virtual Connect Support Utility to install the firmware. If the HP 4Gb Virtual Connect Fibre Channel firmware version 1.11 firmware is installed using Virtual Connect Manager or using HP BladeSystem c-Class Virtual Connect Support Utility version 1.2.0 or earlier, the HP 4Gb VC-FC Module might present a degraded status.
PAGE 5
New features The HP BladeSystem c-Class Virtual Connect Support Utility Version 1.3.
PAGE 6
General requirements • Microsoft® Windows® XP (Service Pack 1 or 2), Windows Server® 2003, or Windows Vista® must be installed on the client. • Users must have Administrative or Power User privileges on the client system to install and run the utility. • A valid HP Virtual Connect firmware package must be available to install. The firmware can be downloaded from the HP website (http://www.hp.com). Click Software and Driver Downloads, and then search for "Virtual Connect Firmware.
PAGE 7
• If the firmware update client is interrupted or loses network connectivity during the update, reset the affected module and restart the firmware update process.
PAGE 8
Resolved issues The following issues that existed in previous versions of VCSU have been resolved in v1.3.