HP Virtual Connect 1Gb Ethernet Cookbook

Appendix B: Scenario-based ProCurve command line reference 90
Scenario 3-6 – ProCurve command line configuration (Multiple
Simple Networks Providing Redundancy and Link Aggregation
802.3ad (LACP))
Connect to the ProCurve switch servicing the VC-Enet uplink ports and enter the following
commands.
NOTE: If two switches are being used, issue the same commands on the second switch.
Table 4 Scenario 3-6 - ProCurve command line configuration (Tagged VLANs).
Command Shortcut Description
>enable >en Privilege mode
#configure terminal #conf Configure in global
mode
#span #span Enables spanning-tree
(MSTP mode by default)
#trunk 1-2 trk1 lacp #trunk 1-2 trk1 lacp Configure LACP port-
trunk 1 to include Ports
1 & 2
#vlan 101 untagged
trk1
#vlan 101 untag trk1 Allow VLAN 101 on
Ports 1 and 2 and
configure Ports 1 and 2
for untagged VLAN
mode
#vlan 102 tagged trk1 #vlan 102 tag trk1 Allow VLAN 1021 on
Ports 1 and 2 and
configure Ports 1 and 2
for untagged VLAN
mode
#vlan 103 tagged trk1 #vlan 103 tag trk1 Allow VLAN 103 on
Ports 1 and 2 and
configure Ports 1 and 2
for untagged VLAN
mode
#vlan 104 tagged trk1 #vlan 104 tag trk1 Allow VLAN 104 on
Ports 1 and 2 and
configure Ports 1 and 2
for untagged VLAN
mode
#vlan 105 tagged trk1 #vlan 105 tag trk1 Allow VLAN 104 on
Ports 1 and 2 and
configure Ports 1 and 2
for untagged VLAN
mode