HP Virtual Connect for c-Class BladeSystem Version 3.00 Setup and Installation Guide for HP Integrity BL8x0c i2 Series Server Blades

Component identification 15
Item Description
4 Port S1 SFP connector**
5 Port S2 SFP connector**
6 USB 2.0 mini AB connector (covered)
7 Next button
8 Ports 1-4 (10/100/1000BASE-T)
9 Reset button (recessed)
* Supports 10GBASE-SR-XFP and 10GBASE-LR-XFP pluggable optical transceiver modules
** Supports 1000BASE-T-SFP and 1000BASE-SX-SFP pluggable optical transceiver modules
HP 1/10Gb-F VC-Enet Module LEDs
Item LED description Status
1 Module status Green = Normal operation
Amber = Degraded condition
Off = Power off
2
Module locator
(UID)
Blue = Module ID selected
Off = Module ID not selected
3 X1 port status
(10GBASE-CX4)
Green = Port is configured and operating
as an uplink port connected to a data
center fabric.
Amber = Port is operating as a stacking
link interconnecting Virtual Connect
modules.
Blue = Port locator (PID)
4 X1 link/port activity Green = Link
Green flashing = Activity
Off = No link
5 Port X2/X3 status
Green = Port is configured and operating
as an uplink port connected to a data
center fabric.
Amber = Port is operating as a stacking
link interconnecting Virtual Connect
module.
Blue = Port locator (PID)