HP Virtual Connect Manager Command Line Interface Version 2.10 User Guide

Command line 14
Managed element Description
fc-connection (on page 29)
Manage Fibre Channel SAN fabric connections
firmware (on page 31)
Manage interconnect module firmware
igmp (on page 32)
Manage Ethernet IGMP Snooping settings
interconnect (on page 32)
Manage I/O interconnect modules
ldap (on page 33)
Manage LDAP configuration settings
ldap-certificate (on page 35)
Manage LDAP certificate information
ldap-group (on page 36)
Manage LDAP group configuration settings
log-target (on page 37)
Manage remote log destination settings
mac-cache (on page 39)
Manage Ethernet MAC cache failover settings
network (on page 40)
Manage Virtual Connect Ethernet networks
port-monitor (on page 44)
Monitor port monitor configurations
profile (on page 46)
Manage Virtual Connect server profiles
server (on page 48)
Manage physical HP BladeSystem servers
serverid (on page 51)
Manage virtual server ID configuration settings
server-port (on page 52)
Display all physical server ports
server-port-map (on page 52)
Manage shared server downlink port mapping configuration
snmp (on page 55)
Modify SNMP configurations
snmp-trap (on page 56)
Modify SNMP-trap configurations
ssh (on page 57)
Display SSL configuration and information
ssl-certificate (on page 58)
Manage SSL certificate information
ssl-csr (on page 59)
Manage an SSL certificate signing request
ssl (on page 59)
Manage weak SSL encryption
stackinglink (on page 60)
Display stacking link information and status
status (on page 60)
Display overall Virtual Connect domain status information
supportinfo (on page 60)
Manage Virtual Connect support information
systemlog (on page 61)
Display Virtual Connect Manager system event log
uplinkport (on page 62)
Manage interconnect module uplink ports
uplinkset (on page 64)
Manage shared uplink port sets
user (on page 65)
Manage local Virtual Connect user configurations
user-security (on page 68)
Manage user security settings
vcm (on page 68)
Manage the Virtual Connect domain manager
version (on page 69)
Display CLI version information
The following sections provide detailed information on how the subcommands are used with each
managed element.
To display command help, type a command followed by ? or -help. For additional information on the
help subcommand, see "Help subsystem (on page 69)."