HP Virtual Connect Manager Version 1.24 Release Notes and Compatibility Matrix

Resolved issues 15
Resolved issues
The following issues that existed in Virtual Connect v1.21 have been resolved in Virtual Connect v1.24:
• The Virtual Connect Manager configuration is now updated properly when a server is inserted and
ports are enabled. This action prevents the loss of the configuration if the Virtual Connect Manager is
reset before the update.
• Excessive Virtual Connect logins to the Onboard Administrator no longer cause a reset to the
Onboard Administrator.
• The API for Virtual Connect Enterprise Manager now returns correct external VLAN IDs.
• The API for Virtual Connect Enterprise Manager now accepts VLAN IDs of 1 and 4094 as valid.
• Domain Status now correctly reports a warning state when stacking links are not redundant.
• The Redundancy status for stacking links correctly displays "No Redundancy" rather than
"Degraded" status.
A potential condition existed in VC-FC v1.02 and v 1.10 with the HP 4GB Virtual Connect FC Module in
which a memory corruption could occur. The issue has been resolved in VC-FC v1.11. When this
condition was encountered, the HP 4 Gb VC-FC module entered an unrecoverable state and did not
initialize. The condition was triggered by a module reset or power cycle. The problem was exhibited in
the following VC-FC conditions:
• Module failed to power up after a reboot.
• Module does not boot and fails to acquire an IP address.
• VC Manager reports module status as NO COMM.