HP Virtual Connect Manager Version 1.24 Release Notes and Compatibility Matrix

Hardware and firmware requirements 4
Hardware and firmware requirements
HP Virtual Connect Manager firmware
The latest HP Virtual Connect Manager firmware package (version 1.24) contains the following firmware
versions:
• HP 1/10Gb VC-Enet version 1.24
• HP 4Gb VC-FC version 1.11
Supported hardware
Version 1.24 of HP Virtual Connect firmware supports the following hardware:
• Virtual Connect modules
o HP 1/10Gb Virtual Connect Ethernet Module
o HP 1/10Gb-F Virtual Connect Ethernet Module
o HP 4Gb Virtual Connect Fibre Channel Module
• Server blades and workstation blades
o HP ProLiant BL460c Server Blade
o HP ProLiant BL465c Server Blade
o HP ProLiant BL480c Server Blade
o HP ProLiant BL680c G5 Server Blade
o HP ProLiant BL685c Server Blade
o HP Integrity BL860c Server Blade
o HP ProLiant xw460c Blade Workstation (only the two embedded Ethernet ports are supported;
Ethernet and Fibre Channel mezzanine cards are not supported)
• Enclosures
o HP BladeSystem c7000 Enclosure with Onboard Administrator
o HP BladeSystem c3000 Enclosure with Onboard Administrator
• Integrated network interfaces and mezzanine cards
o HP BladeSystem Dual NC370i Multifunction Network Adapter
o HP NC373i Integrated Multifunction Gigabit Server Adapter
o HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
o HP NC326m PCI Express Dual Port Multifunction Gigabit Server Adapter
o HP NC325m PCI Express Quad Port Gigabit Server Adapter
o HP NC360M Dual Port 1GbE BL-c Adapter