HP Virtual Connect Version 2.02 Release Notes and Compatibility Matrix

Hardware and firmware requirements
HP Virtual Connect firmware
The latest HP Virtual Connect firmware package (version 2.02) contains the following firmware versions:
• HP VC-Enet version 2.02
• HP 4Gb VC-FC version 1.30
IMPORTANT: When updating firmware, update each domain with the entire firmware
package, which includes the individual VC-Enet and VC-FC firmware. Updating only the VC-
Enet firmware or only the VC-FC firmware is not supported.
Supported hardware
Version 2.02 of HP Virtual Connect firmware supports the following hardware:
• Virtual Connect modules
o HP Virtual Connect Flex-10 10Gb Ethernet Module
o HP 1/10Gb Virtual Connect Ethernet Module
o HP 1/10Gb-F Virtual Connect Ethernet Module
o HP 4Gb Virtual Connect Fibre Channel Module
o HP Virtual Connect 4Gb Fibre Channel Module
• Server blades and workstation blades
o HP ProLiant BL2x220c G5 Server Blade
o HP ProLiant BL260c G5 Server Blade
o HP ProLiant BL460c Server Blade
o HP ProLiant BL460c G5 Server Blade
o HP ProLiant BL465c Server Blade
o HP ProLiant BL465c G5 Server Blade
o HP ProLiant BL480c Server Blade
o HP ProLiant BL495c G5 Server Blade
o HP ProLiant BL680c G5 Server Blade
o HP ProLiant BL685c Server Blade
o HP ProLiant BL685 G5 Server Blade
o HP ProLiant xw460c Blade Workstation (only the two embedded Ethernet ports are supported;
Ethernet and Fibre Channel mezzanine cards are not supported)
o HP Integrity BL860c Server Blade
Hardware and firmware requirements 4