HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

Defining a Boot from SAN Server Profile via CLI

You can copy and paste the following commands into an SSH based CLI session (the command syntax might be

different with an earlier VC version).

# Create and Assign Server Profile “Profile_1” Booting from SAN to server bay 1

add profile BfS_Profile_1

set enet-connection BfS_Profile_1 1 pxe=Enabled Network=1-management-vlan

set enet-connection BfS_Profile_1 2 pxe=Disabled Network=2-management-vlan

set fc-connection BfS_Profile_1 1 Fabric=Fabric_1 Speed=Auto

set fc-connection BfS_Profile_1 1 BootPriority=Primary

BootPort=50:01:43:80:02:5D:19:78 BootLun=1

set fc-connection BfS_Profile_1 2 Fabric=Fabric_2 Speed=Auto

set fc-connection BfS_Profile_1 2 BootPriority=Secondary

BootPort=50:01:43:80:02:5D:19:7D BootLun=1