HP Virtual Connect Fibre Channel Networking Scenarios Cookbook

133
5. The following screen illustrates the creation of the Profile_1 server profile.
Note: WWNs for the domain are provided by Virtual Connect. You can override this setting and use the WWNs
that were assigned to the hardware during manufacture by selecting the Use Server Factory Defaults for Fibre
Channel WWNs checkbox. This action applies to every Fibre Channel connection in the profile.
6. Assign the Profile to a Server Bay and click Apply.
Defining a Server Profile with FCoE Connections, via CLI
You can copy and paste the following commands into an SSH based CLI session with Virtual Connect v3.15; however,
the command syntax might be different with an earlier VC version.
# Create and Assign Server Profile “Profile_1” to server bay 1
add profile Profile_1
set enet-connection Profile_1 1 pxe=Enabled Network=1-management-vlan
set enet-connection Profile_1 2 pxe=Disabled Network=2-management-vlan
set fcoe-connection Profile_1:1 Fabric=Fabric_1 SpeedType=4Gb
set fcoe-connection Profile_1:2 Fabric=Fabric_2 SpeedType=4Gb
assign profile Profile_1 enc0:1