HP BladeSystem c-Class Virtual Connect Support Utility Version 1.9.1 User Guide

Troubleshooting 23
Error code Details
VCSU_ERROR_FTP_NOT_READY
The FTP server is not ready.
VCSU_ERROR_FTP_USERNAME_NOT_VALID
The FTP username is not valid.
VCSU_ERROR_FTP_PASSWORD_INVALID
The FTP password is not valid.
VCSU_ERROR_FTP_REJECTED_PASSIVE_MODE
The FTP server rejected passive mode.
VCSU_ERROR_FTP_REJECTED_COMMAND
The FTP server rejected the command.
VCSU_ERROR_FTP_NO_RESPONSE
The FTP server is not responding.
VCSU_ERROR_FTP_RECEIVE_ERROR
An FTP receive error exists.
VCSU_ERROR_FTP_INVALID_IP
Invalid FTP server IP address
VCSU_ERROR_NO_UPDATABLE_MODULES
No target modules are found that can be
updated.
VCSU_ERROR_MODULE_UPDATE_NOT_REQD
The specified module is not required to be
updated.
VCSU_ERROR_MODULE_ACTIVATE_NOT_REQD
The specified module is not required to be
activated.
VCSU_ERROR_MODULE_INFO_NOT_AVAILABLE
The specified module's information is not
available.
VCSU_ERROR_MODULE_NOT_PRESENT
The specified module is not present.
VCSU_ERROR_MODULE_NOT_POWERED_ON
The specified module is not powered on.
VCSU_ERROR_MODULE_NOT_OPERATIONAL
The specified module is not operational.
VCSU_ERROR_ADMIN_PERMISSIONS_REQD
The admin privileges are required to upgrade
specified modules.
VCSU_ERROR_CHECKPOINT_RENAME_FAILED
The checkpoint rename operation failed on the
specified modules.
VCSU_ERROR_VCM_CONFIGURATION_NOT_IN_SYNC
The VC configuration is still not in sync.
VCSU_ERROR_VCM_FAILOVER_FAILED
Failover to backup module failed.
VCSU_ERROR_BAY_CONFIGURATION_FAILED
Unable to configure the bay
VCSU_ERROR_CLI_COMMAND_EXECUTION_FAILED
Unable to execute CLI command on the target
module
VCSU_ERROR_MODULE_NOT_UPGRADABLE
The specified module is not upgradeable.
VCSU_ERROR_MODULE_COMMAND_FAILED
The command on the target module failed.
VCSU_ERROR_RESET_TIME_OUT
The reset on the target module timed out.
VCSU_ERROR_RESET_FAILED
The reset on the target module failed.
VCSU_ERROR_INVALID_MODULEID
The specified module ID is invalid.
VCSU_ERROR_PREVIOUS_UPDATE_NOT_COMPLETETD
A previous firmware update operation on one
or more modules is not complete.
VCSU_ERROR_MULTIPLE_INSTANCE
Another firmware update is running against the
specified OA.
VCSU_ERROR_FC2_FW_EXTRACTION_FAILED
The extraction of the VC FC2 firmware package
failed.
VCSU_ERROR_DOWNGRADE_FROM_MULTIENCLOSURE
A downgrade from a 2.10 multi enclosure
domain is not supported.
VCSU_ERROR_NOT_MULTIENCLOSURE
Invalid module IDs for single enclosure update
VCSU_ERROR_VCM_MODE_RESTORE_FAILED
Failed to restore the VC mode of primary or
backup module
VCSU_ERROR_ACTIVATION_FAILED
Failed to activate one or more modules
VCSU_ERROR_UNINITIALIZED_MUTEX
Invalid mutex found