HP Virtual Connect for c-Class BladeSystem Setup and Install Guide Version 3.70 and 3.75

HP Virtual Connect Manager 62
Local Users
The first time this screen appears, the Administrator account, which has all administrative privileges, might be
the only user listed. The Administrator account cannot be deleted or have domain privileges removed.
However, the Administrator password can be changed, and the network, server, and storage privileges can
be removed. The default Administrator password is identified on the Default Network Settings label on the
primary VC module.
To reset the Administrator password to the factory default, see "Resetting the Administrator password and
DNS settings (on page 115)." Resetting the Administrator password using the system maintenance switch
does not delete the VC domain, if configured. The password and DNS name of the module is reset to match
the information included on the Default Network Settings label on the module.
The following tasks can be performed on this screen:
• To create a new local user account, click Add User. The User Settings screen appears.
• To edit attributes of a defined local account, select the user name from this screen.
• To delete a user account, click the Delete icon for that line item, and then click Apply.
• To enable strong passwords, click Advanced, and then select the Require Strong Passwords checkbox.
Use the up and down arrows to select a password length between 3 and 40 characters. The default
password length for a newly created domain is 8 characters. With strong passwords enabled,
passwords must also contain at least one character from three of the following four categories:
o Upper-case character
o Lower-case character
o Numeric character