HP Virtual Connect for c-Class BladeSystem Setup and Install Guide

HP Virtual Connect Manager 90
Defined SAN Fabric
This screen lists the SAN fabrics currently defined for this domain. Select Yes to define additional fabrics, or
No if you have defined all available fabrics, and then click Next.
Finish Fibre Channel wizard
When the Fibre Channel Setup Wizard completes, server profiles can be defined and associated with server
blades.
To begin deploying server blades:
1. Be sure the Start the Server Profile Wizard check box is selected.
2. Click Finish. The Server Profile Wizard Welcome screen appears.
The FC SAN configuration can be changed at any time by using one of the following methods:
• Click WWN Settings under Fibre Channel Settings in the left navigation tree of the homepage.
• Select Fibre Channel Settings from the Configure pull-down menu.