HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide

Component identification 103
Item LED description Status
1
Module locator (UID) Blue = Module ID is selected.
Off = Module ID is not selected.
2
Module status Green = Normal operation
Amber = Degraded condition
Amber flashing = Fault condition
Off = Power off
3
5
7
9
X1-X4 port status Ethernet mode
Green = Port is configured and operating as
an uplink port connected to a data center
fabric.
Amber = Port is operating as a stacking link
interconnecting Virtual Connect modules.
Amber flashing = SFP module is invalid for
Ethernet mode.
Purple flashing = Port is configured as a
mirror to port.
Blue = Port locator (PID)
Off = Unconfigured
Fibre Channel mode
Green = Port is online and logged in to an
attached switch.
Green flashing = Port is either not online or
not logged in.
Amber flashing = SFP module is invalid for
Fibre Channel mode.
Blue = Port locator (PID)
Off = Unconfigured
4
6
8
10
X1-X4 link/port
activity
Ethernet mode
Green = 10GbE link
Green flashing = 10GbE activity
Off = No link
Fibre Channel mode
Orange = 2Gb link
Orange flashing = 2Gb activity
Green = 4Gb link
Green flashing = 4Gb activity
Amber = 8Gb link
Amber flashing = 8Gb activity
Off = No link