HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide

HP Virtual Connect Manager 83
• Automatic Login Re-Distribution—Configures the VC FlexFabric module to automatically initiate login
load re-distribution every configured number of seconds if the load becomes unbalanced.
The default is manual login re-distribution. The interval is specified by selecting Configure > Fibre Channel
Settings, and then selecting the Misc. tab. The interval applies to all fabrics defined with the automatic option,
and defaults to 30 seconds.
Defined SAN Fabric
This screen lists the SAN fabrics currently defined for this domain. Select Yes to define additional fabrics, or
No if you have defined all available fabrics, and then click Next.
Finish Fibre Channel wizard
When the Fibre Channel Setup Wizard completes, server profiles can be defined and associated with server
blades.
To begin deploying server blades:
1. Be sure the Start the Server Profile Wizard check box is selected.
2. Click Finish. The Server Profile Wizard Welcome screen appears.
The FC SAN configuration can be changed at any time by using one of the following methods: