HP Virtual Connect for c-Class BladeSystem Version 2.30 User Guide

Server management 121
TIP: Server profiles can also be edited from the Server Profiles screen (on page 119).
The following table describes the fields within the Edit Server Profile screen.
Column name Description
Profile
Profile Name Descriptive name for the server profile. Do not use spaces.
Status Status of the server profile
Ethernet Network Connections
(Physical ports)
Port Relative order of the Ethernet port on the server receiving the profile.
System board NICs are first in the order, followed by NICs on mezzanine
cards
Network Name Name of the network associated with this port selected from list of defined
networks
Status Status of the network
Port Speed Setting The requested operational speed for the server port. Valid values include
"Auto", "Preferred", and "Custom".
If the speed type is "Auto", the maximum port speed is determined by the
maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as
the preferred speed of the network to which the connection is associated.