HP Virtual Connect for c-Class BladeSystem Version 2.30 User Guide

Domain management 25
Domain Settings (Domain Configuration) screen
Use this screen to change the domain name or delete a domain.
The Remove from Domain feature (also known as administrative removal) enables users to remove an
interconnect module from the Virtual Connect domain without having to delete the entire domain, or
having the bay permanently configured for a specific interconnect module type. After an Ethernet module
has been physically removed from the enclosure and none of its ports are part of an Ethernet network
and/or Shared Uplink Set, the module can be removed from the Virtual Connect domain. A FC module
can be administratively removed when none of its fabrics are in use by a profile.
For additional information, see "Interconnect Bay summary screen (Ethernet module) (on page 139)" and
"Administrative module removal (on page 152)."
The following table describes the available actions in the Domain Settings (Domain Configuration) screen.
Clicking another link in the pull-down menu or left navigation window causes current edits that have not
been applied to be lost.
Task Action
Change the domain name Enter the revised domain name, and then click Apply.
Display single-dense server bays Click the checkbox next to the appropriate selection. Available if
double-dense compatibility is selected during import.
Delete a domain Verify that the correct domain name is displayed, and then click
Delete Domain. See "Deleting a domain (on page 26)."
Save changes and remain on this Click Apply.