HP Virtual Connect for c-Class BladeSystem Version 2.30 User Guide

Domain management 27
The following table describes the available actions in the Domain Settings (Domain IP Address) screen.
Clicking another link in the pull-down menu or left navigation window causes current edits that have not
been applied to be lost.
Task Action
Use a domain IP address Select the box next to Use Domain IP address, and then enter the
IP Address, Subnet Mask, and Gateway.
Clear unsaved changes on the screen Click Clear.
Save changes and remain on this
screen
Click Apply.
Cancel without saving changes Click Cancel.
Domain Settings (Domain Enclosures)
Use this screen to import, delete, or add enclosures in the domain.
Multiple enclosures are supported only if a 1/10Gb-F VC-Enet module or Flex-10 module is running in
bay 1 and bay 2 of the primary enclosure.