HP Virtual Connect for c-Class BladeSystem Version 3.30 User Guide

Virtual Connect networks 104
This summary screen displays the mapping of networks to external shared uplink connections. This screen is
only applicable if multiple networks identified by VLAN tags are being connected over a single external
uplink set.
The following table describes the fields within the Shared Uplink Sets (Associated Networks) screen.
Field name Description
Uplink Set
Name of the shared uplink set
Network Status
Status of the network
Shared Network Name
Name of the associated network
VLAN ID
Displays the VLAN ID number
Smart Link
Displays whether Smart Link is enabled or disabled
Private Network
Displays whether the network is designated or not designated as a private
network.
Action
Go to network or shared uplink set
The following table describes the available actions in the Shared Uplink Sets (Associated Networks) screen.
Clicking another link in the pull-down menu or left navigation tree causes current edits that have not been
applied to be lost.
Task Action
Edit a network
Click Go to Network in the Action column, or right-click the network, and
then select Go to Network.
Edit a shared uplink set
Click Go to Shared Uplink Set in the Action column, or right-click the
shared uplink set, and then select Go to Shared Uplink Set.
Add a shared uplink set
Click Add below the table, or right-click on the header row to display a
menu, and then select Add SUS.