HP Virtual Connect for c-Class BladeSystem Version 3.30 User Guide

Virtual Connect fabrics 108

• Multi-enclosure domain

The following table describes the columns and fields within the Define SAN Fabric screen.

Column Description

Fabric Name

Descriptive name for the virtual fabric. Do not use spaces.

always Manual. For FlexFabric modules, this can be set as described in "Login

re-distribution (on page 109)."

Configured Speed

Speed of the uplink ports, available after a port has been added. Valid values once

allowed are 2Gb, 4Gb, 8Gb, and Auto.

Uplink Port

Number of the FC module uplink port

Bay

Enclosure bay selected for the SAN fabric. Only uplinks on the same bay can be in the

same SAN fabric.

Port Status

Shows the link status, link speed, and connectivity of the port. If If the port is unlinked

and no connectivity exists, the cause is displayed. For more information about possible

causes, see "Port status conditions (on page 203)."

Speed

Port speed for the uplink ports in the fabric

Connected To

WWN of the principal switch on the SAN fabric that this port is connected to on the

other end

Action

Perform delete operations

The following table describes the available actions in the Define SAN Fabric screen. Clicking another link in

the pull-down menu or left navigation tree causes the current edits that have not been applied to be lost.

Task Description

Create a fabric name

Type a name in the Fabric Name field. Do not use spaces.