HP Virtual Connect for c-Class BladeSystem Version 3.30 User Guide

Virtual Connect fabrics 111

Use this screen to edit a SAN fabric configuration.

The following table describes the fields within the Edit SAN Fabric screen.

Field Description

Fabric

Fabric Name

Descriptive name for the fabric. Do not use spaces.

Status

Status of the fabric

always Manual. For FlexFabric modules, this can be set as described in "Login

re-distribution (on page 109)."

Configured Speed

Requested speed of the uplink port. Valid values once allowed are 2Gb, 4Gb, 8Gb,

and Auto.

Enclosure Uplink Ports

Uplink Port

Faceplate name of the port

Bay

Enclosure bay selected for the SAN fabric

Port Status

Shows the link status, link speed, and connectivity

of the port. If If the port is unlinked

and no connectivity exists, the cause is displayed. For more information about possible

causes, see "Port status conditions (on page 203)."

Speed

Actual, connected speed of the uplink port

Connected To

WWN of the principal switch on the SAN fabric that this port is connected to on the

other end

Action

Perform delete operations

The following table describes the available actions in the Edit SAN Fabric screen. Clicking another link in the

pull-down menu or left navigation tree causes the current edits that have not been applied to be lost.