HP Virtual Connect for c-Class BladeSystem Version 3.30 User Guide

Virtual Connect domains 32
Trap Category Severity MIB
Output utilization below low-water
mark²
VC-Enet Port Threshold NORMAL VCM-MIB
Input errors above high-water mark²
VC-Enet Port Threshold WARNING VCM-MIB
Input errors below low-water mark²
VC-Enet Port Threshold NORMAL VCM-MIB
Output errors above high-water mark²
VC-Enet Port Threshold WARNING VCM-MIB
Output errors below low-water mark²
VC-Enet Port Threshold NORMAL VCM-MIB
¹ Only supported by the HP VC 8Gb 24-Port FC module
² The VC Module MIB has the capability to send traps when certain bandwidth and throughput utilization thresholds are
reached. The threshold values are not configurable in this release and are defined as follows:
— Port utilization high water mark 95%
— Port utilization low water mark 75%
— Errors high water mark 5%
— Errors low water mark 1%
For more information, see the description field in the source code for individual MIBs.
The VC-FC module generates connUnitPortStatusChange traps based on changes to the connUnitPortStatus
element of the FA-MIB. The following table shows the mapping of connUnitPortStatusChange trap severities
to the VC Domain MIB's trap severity definitions.
connUnitPortStatus value Severity
unknown
INFO
unused
INFO
ready
NORMAL
warning
WARNING
failure
CRITICAL
nonparticipating
INFO
initializing
INFO
bypass
INFO
ols
MAJOR
other
INFO
VC Module MIB traps
The following table lists traps in the VC Module MIB.
Trap name Trap data Description
vcModRoleChange
moduleRole The VCM role of the module has changed.
vcModInputUtilizationUp
port identification The input line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is the
index of the affected port in
ifTable
.
vcModInputUtilizationDown
port identification The input line utilization on a port has dropped below it
s
low-water mark for longer than 30 seconds. port is the
index of the affected port in
ifTable
.
vcModOutputUtilizationUp
port identification The output line utilization on a port has exceeded its
high-water mark for longer than 30 seconds. port is the
index of the affected port in
ifTable
.
vcModOutputUtilizationDown
port identification The output line utilization on a port has dropped below its
low-water mark for longer than 30 seconds. port is the
index of the affected port in
ifTable
.