HP Virtual Connect for c-Class BladeSystem Version 3.30 User Guide

Virtual Connect domains 41
System Log (Configuration) screen
Use this screen to view or set remote log destination settings.
Column Description
Log host
The IP address or the DNS of the configured remote log destination
Log severity
Severity of the log messages that should be sent to the specified destination. Valid
values include "Critical", "Error", "Warning", and "Informational".
Transport
The transport
protocol to be used for sending the log messages to the destination. Valid
values include "TCP" and "UDP".
Port
The port to be used on the destination to send the log messages. Valid values include
1 to 65536. The default value is 514.
Security
Secure transmission of the log messages. Valid values include "None" and "STunnel".
The default value is "None", and no encryption is used during transmission.
The "STunnel" option can be used only if the transport protocol used is TCP.
Date Format
The timestamp format for the log messages. Valid values include "RFC3164" (Nov 26
13:15:55) and "ISO8601" (1997-07-16T19:20:30+01:00). The default value is
"RFC3164".
Enabled
Enables or disables the remote log destination
To define a new remote log destination, click Define Target.
To send a test message to all enabled remote log destinations, click Test.