HP Virtual Connect for c-Class BladeSystem Version 3.30 User Guide

Virtual Connect networks 79
Select Monitored Ports screen
The Select Monitored Ports screen is displayed when the Select Ports button is clicked on the Ethernet Settings
(Port Monitoring) screen. You can select up to 16 server ports to monitor. To filter the list of ports, select one
or more of the boxes at the top of the screen.
The following table describes the available actions in the Select Monitored Ports screen.
Task Action
Select a port to be monitored
Select the checkbox corresponding to the port.
Remove a port from the
monitored list
Deselect the checkbox corresponding to the port.
Filter the list by I/O bay
Select an I/O bay from the Filter by Interconnect Module module bay
drop-down list. Only I/O bays with VC-Enet interconnect devices are
displayed.
Filter the list by interconnect
module server port
Select a port from the Filter by Interconnect Module ports pull-down list.
Filter the list by a specific profile
Select a profile from the Filter by Profile profiles pull-down list.
Filter the list by a profile
connection
Select a profile connection from the Filter by Profile profile connection
drop-down list.
Filter the list by server bay
Select a bay from the Filter by Physical Server bay pull-down list.
Filter the list by server port
Select a port from the Filter by Physical Server port pull-down list.
Accept selected ports and return
to the Port Monitoring screen
Click OK.
Clear newly selected ports
without saving and return to the
Port Monitoring screen
Click Cancel.