HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.01 User Guide

ManualsBrandsHP ManualsComputer AccessoriesHP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem

Command line 48

Item Description

->reboot server * -ForceOnTimeout -timeout=180

Reboots all servers using the ForceOnTimeout option and a custom timeout

->reboot server *

Reboots all servers in the domain

->reboot server enc0:*

Reboots all servers in a specific enclosure

->reboot server enc0:1

Reboots a specific multi-blade server that occupies bays 1-4 of the primary

enclosure

Item Description

show server

Display all servers in the domain.

Syntax

show server [<ServerID|*>]

Parameter

ServerID (optional)

The reference ID of a server in the domain. The format of the server ID is

<EnclosureID:Bay>. If the EnclosureID is not provided, then the primary or local

enclosure is used by default.

For a multi-blade server, the ServerID must be that of the monarch bay. This is the ID

shown in the summary listing.

Examples

->show server

Displays a summary listing of all servers

->show server *

Displays detailed information for all servers

->show server enc2:*

Displays detailed information for all servers in a specific enclosure

->show server enc0:4

Displays detailed information for the specific server in device bay 4 of an enclosure

named "MyEnclosure"

->show server enc0:5

Displays detailed information for a specific multi-blade server that occupies bays

5-8 of the primary enclosure

serverid

Manage virtual Server ID configuration settings.

Supported actions: help, set, show

Item Description

set serverid

Modify Virtual Server ID domain settings. The serial number attributes can be

changed only in one of the following scenarios:

•

Virtual Server ID source is Factory-Default.

•

Virtual Server ID source is VC-Defined or User-

Defined, but no profiles are using

server IDs from this source.

•

Virtual Server ID source is User-Defined, and this range is being extended by

lowering the start or increasing the end values.

Syntax

set serverid Type=Factory-Default

set serverid Type=VC-Defined [PoolID=<1-64>]

set serverid Type=User-Defined Start=VCX01nnnnn