HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.01 User Guide

Command line 87
Name RFC Description
received at this port.
numMcastFramesTx
FCMGMT-
MIB
connUnitPortStatCountTxMulticastObjec
ts - Count of Multicast Frames or Packets
transmitted out this port.
numMcastTimeouts
N/A Number of timeouts reported for
multicast frames. A single frame could
cause this counter to increment if it timed
out for each multiple destination.
numPrimitiveSeqProtoc
olErr
FCMGMT-
MIB
connUnitPortStatCountPrimitiveSequenc
eProtocolErrors - Count of primitive
sequence protocol errors detected at this
port. This count is part of the Link Error
Status Block (LESB). (FC-PH 29.8).
numRxBadEOFs
N/A The number of frames received with a
badly formed end-of-frame.
numRxCRCs
N/A Received frames: the number of CRC
errors detected.
numRxClass1Frames
FCMGMT-
MIB
connUnitPortStatCountClass1RxFrames -
Count of Class 1 Frames received at this
port. This is a Fibre Channel only stat.
numRxClass2Frames
FCMGMT-
MIB
connUnitPortStatCountClass2RxFrames -
Count of Class 2 Frames received at this
port
numRxClass3Frames
FCMGMT-
MIB
connUnitPortStatCountClass3RxFrames -
Count of Class 3 Frames received at this
port
numRxLCs
N/A Number of link control frames received
at this port
numRxOfflineSequence
s
FCMGMT-
MIB
connUnitPortStatCountRxOfflineSequenc
es - Count of Offline Primitive OLS
received at this port
rxBytePeakRate
N/A Receive max byte rate since last reset -
(bytes/sec)
rxByteRate
N/A Receive instantaneous byte rate -
(bytes/sec)
rxFramePeakRate
N/A Receive max frame rate since last reset –
(frames/sec)
rxFrameRate
N/A Receive instantaneous frame rate -
(frames/sec)
samplingRate
N/A This controls the rate of statistics
sampling in switch ports. Polling must
be frequent enough to avoid counter
overflow for errors and tx/rx bytes
sfpStatus
N/A SFP status.
txBytePeakRate
N/A Transmission max byte rate since last
reset - (bytes/sec)
txByteRate
N/A Receive instantaneous byte rate -
(bytes/sec)
txFramePeakRate
N/A Transmission max frame rate since last
reset - (frames/sec)