HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.10/3.15 User Guide

Command line 100
Name RFC Description
fcNumberOfflineSequence
s
FCMGM
T-MIB
connUnitPortStatCountNumberOfflineS
equences - Count of Offline Primitive
sequence received at this port.
This is a Fibre Channel only stat.
fcPrimitiveSeqProtocolError
s
4044 fcmPortPrimSeqProtocolErrors - The
number of primitive sequence protocol
errors detected at this port. This count is
part of FC-PH's Link Error Status Block
(LESB).
fcRxByteRate
N/A Average receive byte rate (Byte/s) for
sample period of once a second.
fcRxFrameRate
N/A Average receive frame rate (frame/s)
for sample period of once a second.
fcRxLinkResets
4044 fcmPortRxLinkResets - The number of
Link Reset (LR) Primitive Sequences
received.
fcRxOfflineSequences
4044 fcmPortRxOfflineSequences - The
number of Offline (OLS) Primitive
Sequences received at this port.
fcSmoothingOverflowError
s
N/A The number of times that a violation of
FC rules on the incoming signal were
detected. An example of a violation
would be an insufficient number of idles
were received between the frames.
fcTotalRxBytes
N/A Total number of bytes received.
fcTotalRxFrames
N/A Total number of frames received.
fcTotalTxBytes
N/A Total number of bytes transmitted.
fcTotalTxFrames
N/A Total number of frames transmitted.
fcTxByteRate
N/A Average transmit byte rate (Byte/s) for
sample period of once a second.
fcTxFrameRate
N/A Average transmit frame rate (frame/s)
for sample period of once a second.
fcTxLinkResets
4044 fcmPortTxLinkResets - The number of
Link Reset (LR) Primitive Sequences
transmitted.
fcTxOfflineSequences
4044 fcmPortTxOfflineSequences - The
number of Offline (OLS) Primitive
Sequences transmitted by this port.
Fibre channel ports
FC uplink ports
Name RFC Description
numAddressErrors
FCMGMT-
MIB
connUnitPortStatCountAddressErrors -
Count of frames received with unknown
addressing. e.x. unknown SID or DID.
the SID or DID is not known to the routing
algorithm.