HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.10/3.15 User Guide

Command line 19
domain
Manage general Virtual Connect domain settings and information.
Supported actions: delete, help, set, show
Item Description
delete domain
Delete the existing Virtual Connect domain configuration.
Deleting the domain removes the entire Virtual Connect domain configuration and
resets it to the original defaults. After the domain has been deleted, you are logged
out and the Virtual Connect Manager resets.
Syntax
delete domain [-quiet]
Option
quiet
Suppresses user confirmation prompts. This option is useful when scripting delete
domain operations.
Examples
->delete domain
Deletes the Virtual Connect domain configuration and prompts for user
confirmation
->delete domain -quiet
Deletes the Virtual Connect domain quietly without prompting for user
confirmation
(primarily used in automated scripting scenarios)
Item Description
set domain
Modify general Virtual Connect domain configuration properties, such as the
domain name, domain IP address, and MAC and WWN address pool settings.
Syntax
set domain [Name=<NewName>] [DomainIp=<Enabled|Disabled>]
[IpAddress=<IPAddress>] [SubnetMask=<mask>]
[Gateway=<Gateway>] [MacType=<VC-Defined|Factory-Default|
User-Defined>] [MacPool=<1-64>] [MacStart=<MAC address>]
[MacEnd=<MAC address>] [WwnType=<VC-Defined |
Factory-Default | User-Defined>] [WwnPool=<1-64>]
[WwnStart=<WWN Address>] [WwnEnd=<WWN Address>]
[SingleDense=true|false]
Properties
Name(optional)
The new name of the domain. Valid characters include alphanumeric, "_", and ".".
The maximum length of the name is
31
characters.
DomainIP (optional)
Enables or disables the Virtual Connect domain IP address. If enabled, then a valid
IP address subnet mask must be configured. If disabled, then DHCP is used to obtain
a valid IP address.
Enabling domain IP address configuration or changing the domain IP address can
cause a temporary loss of connectivity to the Virtual Connect Manager. Use caution
when changing these settings. Valid values include "Enabled" and "Disabled".
IpAddress (optional)
A valid IP address to use for the domain IP address configuration. The IP address
must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9.
Example: 192.168.0.10
SubnetMask (Required
if IP address
specified)
A valid subnet mask for the domain IP address configuration. The subnet mask must
be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and 9. Example:
255.255.255.0
Gateway (Required if
IP address
specified)
A valid gateway address for the domain IP address configuration. The gateway
address must be in the format xxx.xxx.xxx.xxx, where x is a number between 0 and
9. Example: 192.168.0.1