HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.10/3.15 User Guide

Command line 42
Item Description
->add iscsi-connection MyNewProfile
Adds a new iSCSI connection and leaves it unassigned
->add iscsi-connection MyNewProfile
AddressType=Factory-Default
Adds a new iSCSI network connection and uses factory-default addresses
->add iscsi-connection MyNewProfile
AddressType=User-Defined iScsiMAC=00-17-A4-77-00-00
Adds a new iSCSI network connection and provides a user-defined MAC
address
->add iscsi-connection MyProfile Network=MyNetwork
SpeedType=Preferred
Adds a new iSCSI network connection and sets the speed to Preferred
->add iscsi-connection MyProfile Network=MyNetwork
SpeedType=Custom Speed=2000
Adds a new iSCSI network connection and sets the speed to 2Gb
Item Description
remove
iscsi-connection
Remove the highest numbered iSCSI connection from the server VC profile. If no
connections exist, then an error message appears.
Syntax
remove iscsi-connection <ProfileName>
Parameter
ProfileName (required)
The name of an existing profile from which the connection is to be removed
Example
->remove iscsi-connection MyProfile
Removes the last added iSCSI connection from the profile
Item Description
set iscsi-connection
Modify the properties of a specified iSCSI connection.
Syntax
set iscsi-connection <ConnectionID> [Network=<Network
Name>] [SpeedType=<Auto|Preferred|Custom>]
[Speed=<speed>]
Parameters
ConnectionID
(required)
The ID of an existing iSCSI connection. The ID format is <ProfileName:Port>.
Properties
Network (optional)
The name of an existing network to associate with the connection. If the network
name is not specified or is unassigned, it can be assigned later.
SpeedType (optional)
The requested operational speed for the server port. Valid values include
"Auto", "Preferred", and "Custom". The default value is "Preferred".
If the speed type is "Auto", the maximum port speed is allocated, constrained by
the maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as the
preferred speed of the network to which the connection is associated. If no
preferred speed is configured for a network, it defaults to "Auto".
If the speed type is "Custom", the user can configure any speed from 100Mb to
MAX configured speed for the network in 100Mb increments.
Speed (required if the
Speedtype is Custom)
The user-defined speed for server port. Valid values include 100Mb to MAX
configured speed for the network in 100Mb increments.