HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.10/3.15 User Guide

Command line 68
Item Description
Examples
->show snmp-trap MyTrap1
Displays the SNMP trap configuration for a single trap
->show snmp-trap *
Displays all configured SNMP traps
Item Description
->test snmp-trap
Generates an SNMP test trap and sends it to all configured destinations.
Traps participating in the test must be configured, at a minimum, with the following
attributes:
DomainCategories: DomainStatus
Severity: Info
Syntax
test snmp-trap
Example
->test snmp-trap
Generates an SNMP test trap and sends it to the configured destinations
ssh
Manage SSH configuration and information.
Supported actions: help, load, remove, show
Item Description
load ssh
Transfer the SSH key from a remote FTP server and apply it to the Virtual Connect
domain. A customized SSH key enables additional security for SSH clients that are
allowed to access the domain configuration. If a new custom SSH key is applied, then
the SSH clients must be configured correctly to have access.
Syntax
load ssh Address=<ftp://user:password@ipaddress>
FileName=<name>
Properties
Address
(required)
The IP address or host name of an FTP server, with username and password
FileName
(optional)
The name of the remote file containing the SSH key to transfer
Example
->load ssh Address=ftp://user:password@192.168.10.12
FileName=/ssh_key.pub
Transfers the SSH key from the remote FTP server
Item Description
remove ssh
Remove any custom SSH keys that have been applied.
Syntax
remove ssh
Example
->remove ssh
Removes SSH keys
Item Description
show ssh
Display the SSH key configuration.