HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.30 User Guide

Command line 22
Any user- or VC-defined MAC addresses, WWNs, and logical serial numbers will not appear in the output
to avoid duplicating these values.
Supported actions: help, show
Item Description
show config
Generate a configuration script from the running domain.
Syntax
show config
Example
->show config
Displays the configuration script for the running domain
configbackup
Manage the domain configuration file.
Supported actions: help, restore, save
Item Description
restore configbackup
Transfer a configuration file from a remote TFTP or FTP server and restore the
configuration. Be sure that the domain state is IMPORTED before attempting to
restore the configuration.
Syntax
restore configbackup [-quiet][-maskEncryptKey]
address=<tftp://ipaddress/[filename] |
ftp://user:password@ipaddress/[filename]>
[encryptionkey=<secret password>]
[ignoreenclosureid=<true|false>]
[ignorefwversion=<true|false>]
Option
quiet (optional)
Suppresses user confirmation prompts
maskEncryprtKey
(optional)
Enables you to interactively specify the encryption key as a masked string at the
command prompt
Properties
Address (required)
A valid IP address of a TFTP or FTP server with user name and password (where
needed) and the name of the configuration backup file. If not specified, the
default file name is "vc-config-backup". The file path specified is treated as
relative to the login directory for the user on the FTP server. Be sure that the
permissions are appropriate for a successful transfer.
EncryptionKey
(optional)
A password used to encrypt the configuration backup file
IgnoreEnclosureID
(optional)
Restores a configuration that was generated on another enclosure. Valid values
are "true" and "false". The default value is "false". When the value is set to
"false", the configuration generated on another enclosure is rejected.
IgnoreFWVersion
(optional)
Restores a configuration that was generated on another firmware version. Valid
values are "true" and "false". The default value is "false". When the value is set
to "false", the configuration generated on another firmware version is rejected.
Example
->restore configbackup
address=tftp://192.168.10.12/<filename>
Restores a configuration backup file from a remote TFTP server
->restore configbackup
address=ftp://user:password@192.168.10.12/<filename>
Restores a configuration backup file from a remote FTP server