HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.30 User Guide

Command line 60
Item Description
network to network access group associations appears.
Examples
->show nag-network
Displays a summary of all network to network access group associations in the domain
->show nag-network *
Displays detailed information for all network to network access group associations in
the domain
->show nag-network DatabaseNetGroup:Net1
Displays detailed information about the association between a specified network
access group and a specified network
network
Manage Virtual Connect Ethernet networks.
Supported actions: add, help, remove, set, show
Item Description
add network
Create a new Ethernet network. After the network is created, uplink ports can be added
if the network is not using a shared uplink set.
The SmartLink property is no longer supported during the creation of the network. If
specified, it is ignored. To configure the SmartLink attribute, use the set network
command.
Syntax
add network <NetworkName> [-quiet]
[Nags=<nagName>[,<nagName2>,...]] [UplinkSet=<UplinkSetName>
VLanID=<VLanID>] [State=<Enabled|Disabled>]
[NativeVLAN=<Enabled|Disabled>] [Private=<Enabled|Disabled>]
[ConnectionMode=<Auto|Failover>]
[VLanTunnel=<Enabled|Disabled>] [PrefSpeedType=<Auto|Custom>]
[PrefSpeed=<100Mb–10Gb in 100Mb increments]
[MaxSpeedType=<UnRestricted|Custom>] [MaxSpeed=<100Mb–
10Gb in
100Mb increments>]
Parameter
NetworkName
(required)
The unique name of the new network to create. Valid characters include alphanumeric,
"_", and ".". The maximum length of the name is 64 characters.
Option
Quiet
Suppresses user confirmation prompts during network creation and modification. This
option is used mainly in automated scripting scenarios.
Properties
Nags (optional)
The names of the existing network access groups of which this network is a member,
separated by commas. Do not use spaces unless they are enclosed in quotation marks.
If no network access groups are specified, the domain default network access group
(Default) is used.
UplinkSet
(optional)
The name of an existing shared uplink set to use with this network. If this property is
specified, a valid VLAN ID must also be provided. The limit is 32 networks per shared
uplink set.
VLanID (optional)
The VLAN ID associated with the network (used with the shared uplink set only). The
VLAN ID is a valid number between 1 and 4094.
State (optional)
Enables or disables the network. Valid values are "Enabled" and "Disabled". The
default value is "Enabled".
NativeVLAN
(optional)
Enables or disables the network to act as a native VLAN. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property can be specified only if