HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.30 User Guide

Command line 85
Item Description
->set snmp enet ReadCommunity=mydatacenter1
SystemContact=[e-mail] Enabled=true
Enables the SNMP agent for VC-Enet modules and supplies a community string
->set snmp fc ReadCommunity=mydatacenter
SystemContact=FcAdmin Enabled=true
Enables the SNMP agent for VC-FC modules
Item Description
show snmp
Display the SNMP configuration settings for the VC domain.
Syntax
show snmp [Type]
Parameter
Type (optional)
Indicates the type of SNMP configuration to display. If the type is not specified, all
VC SNMP configuration information appears. Valid values include "Enet" and
"FC".
Examples
->show snmp Enet
Displays SNMP configuration for VC-Enet modules only
->show snmp FC
Displays SNMP configuration for VC-FC modules only
->show snmp
Displays SNMP configuration for all modules
snmp-trap
Manage SNMP trap information.
Supported actions: add, help, remove, set, show, test
Item Description
add snmp-trap
Adds a new SNMP trap destination.
Avoid using duplicate trap destinations. Setting duplicate trap destinations can
result in duplicate traps being sent to the same destination, or only one of the trap
destinations being configured.
Syntax
add snmp-trap <Name> Address=<IPv4Address|DNSname>
[Community=<community name
string>][Format=<SNMPv1|SNMPv2>][Severity=<trap
severity|All|None>][DomainCategories=<domain trap
category|All|None>][EnetCategories=<enet trap
category|All|None>][FcCategories=<fc trap
category|All|None>]
Parameter
Name (required)
A unique name for the new trap being added
Properties
Address (required)
IPv4 address or DNS name for the trap destination
Community (optional)
The SNMP community name
string for the specified trap. If not specified, the default
value is "public". For VC-Enet modules, the maximum string length is 39. For VC-
FC
modules, the maximum string length is 24.
Format
Format of the new trap. Valid values are "SNMPv1" and "SNMPv2". If not
specified, the default is "SNMPv1".
Severities
Trap severities to send to the destination. Valid values are "Normal", "Unknown",
"Info", "Warning", "Minor", "Major", "Critical", "All", and "None". Multiple