HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.30 User Guide

Command line 98
Item Description
Role (optional)
The role played by the port if the connection mode of the network or shared uplink set
is selected as "Failover". Valid values include "Primary" and "Secondary". The default
is "Primary".
Examples
->add uplinkport enc0:1:1 Network=MyNetwork
Adds a new uplink port (Bay 1, Port 1) to a network named MyNetwork
->add uplinkport enc0:2:4 Network=MyNetwork Speed=1Gb
Adds a new uplink port (Bay 2, Port 4) to a network and sets the port speed
->add uplinkport enc0:2:3 UplinkSet=MyUplinkSet
Adds a new uplink port (Bay 2, Port 3) to a shared uplink set
->add uplinkport enc0:2:4 Network=MyNetwork Role=Primary
Adds a new uplink port to a network with the connection mode as Failover and the
port
role as Primary
Item Description
remove uplinkport
Remove an uplink port element from a network or a shared uplink port set.
Syntax
remove uplinkport <PortID> [Network=<NetworkName> |
UplinkSet=<UplinkSetName>]
Parameters
PortID (required)
The ID of the port to remove from a network. The port ID must be in the format
<EnclosureID>:<InterconnectBayNumber>:<PortNumber>.
If EnclosureID is not specified, it defaults to the local enclosure.
Network
(optional)
The name of the network from which the port is removed
UplinkSet
(optional)
The name of the shared uplink set from which the port is removed
Examples
->remove uplinkport enc0:1:2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network named MyNetwork
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named BlueNetwork
->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1
Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set
Item Description
set uplinkport
Modify an uplink port that exists as a member of a network or shared uplink port set.
Syntax
set uplinkport <PortID> [Network=<NetworkName>|
UplinkSet=<UplinkSetName>][Speed=<Auto|10Mb|100Mb|1Gb|
10Gb|Disabled>] [Role=<Primary|Secondary>]
Parameter
PortID (required)
The ID of the port to modify. The specified port must already be added to a network or
shared uplink set. The port ID is in the format
<EnclosureID>:<BayNumber>:<PortNumber>
.
Properties
Network
(required)
The name of the
network to which the port belongs if the shared uplink set name is not
specified
UplinkSet
(required)
The name of the shared uplink set to which the port belongs if the network name is not
specified
Speed (optional)
Specifies the port speed for the port. Valid values include "Auto", "10Mb", "100Mb",
"1Gb", "10Gb", and "Disabled".