HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.51/3.60 User Guide

Configuring the Virtual Connect domain using the CLI 147
10
Start with 8 FCoE-capable
modules, then create a
profile and add
connections.
Port Connected to
1 Bay 1
2 Bay 2
3 Bay 3
4 Bay 4
5 Bay 5
6 Bay 6
7 Bay 7
8 Bay 8
Bay 1 Bay 2
Bay 3 Bay 4
Bay 5 Bay 6
Bay 7 Bay 8
Port Connected to
1 Bay 1
2 Bay 2
3 Bay 3
4 Bay 4
5 Bay 5
6 Bay 6
7 Bay 7
8 Bay 8
9 Bay 1
10 Bay 2
11 Bay 3
12 Bay 4
13 Bay 5
14 Bay 6
15 Bay 7
16 Bay 8
17 Bay 1
18 Bay 2
19 Bay 3*
20 Bay 4*
21 Bay 5*
22 Bay 6*
23 Bay 7*
24 Bay 8*
25 Bay 1
26 Bay 2
*Not mapped
Add connection, 18
times
Logging out of the CLI
To log out of the CLI, use the exit command:
>exit
Common management operations
The following table provides the syntax for the most commonly used management operations.
For more information on a particular command, see "Managed elements (on page 13)."
Operation Examples
Display general domain settings
>show domain
Display predefined address pools
>show domain addresspool
Display interconnect modules
•
Summary display
>show interconnect
•
Detailed display
>show interconnect *
•
Single module display
>show interconnect enc0:2
Display overall domain status
>show status