HP Virtual Connect Manager Command Line Interface for c-Class BladeSystem Version 3.51/3.60 User Guide

Command line 31
Item Description
The HP 4Gb VC-FC Module, HP Virtual Connect 4Gb FC Module, HP VC 8Gb 20-Port
FC Module, and HP VC 8Gb 24-Port FC Module support only manual login
re-distribution. The HP VC FlexFabric 10Gb/24-port Module supports both auto and
manual login re-distribution.
Ports (optional)
A list of one or more logical FC ports to be added to the fabric. Each port is specified
in the format "<port1>,<port2>,...", where port is the interconnect module port to be
modified in the fabric (affects all modules within a bay group).
For HP VC FlexFabric 10Gb/24-port Modules, port numbers 1, 2, 3, and 4
correspond to ports X1, X2, X3, and X4, respectively.
Examples
->set fabric MyFabric1 Name=MyNewName1
Changes the name of an existing fabric
->set fabric MyFabric2 Speed=2Gb LinkDist=Auto
Modifies the port speed and login re-distribution
->set fabric MyFabric3 Ports=1,2,3,4
Modifies the fabric ports contained in the fabric
->set fabric MyFabric5 -loadBalance
Performs load balancing on a fabric with manual login re-distribution
Item Description
show fabric
Display all fabric information.
Syntax
show fabric [<FabricName>|*]
Parameter
Name (optional)
Name of an existing fabric. Use “*” to display a detailed output of all fabrics in the VC
domain. If not specified, a summary output of all fabrics appears.
Examples
->show fabric
Displays a summary of all FC SAN fabrics
->show fabric *
Displays detailed information for all FC SAN fabrics
->show fabric SAN_5
Displays detailed information for a specific FC SAN fabric
fc-connection
Manage Fibre Channel SAN connections.
Supported actions: add, help, remove, set, show
Item Description
add fc-connection
Add a new FC SAN connection to an existing server profile.
For more information, see "General requirements for adding FC or FCoE
connections (on page 144)."
Syntax
add fc-connection <ProfileName> [Fabric=<FabricName>]
[Speed=<Auto|1Gb|2Gb|4Gb|8Gb|Disabled>]
[AddressType=<Factory-Default|User-Defined>]
[PortWWN=<WWN address>] [NodeWWN=<WWN address>]
Parameter
ProfileName (required)
The name of an existing profile to which the new connection is added
Properties
Fabric (optional)
The name of an existing fabric to associate with the connection. If the fabric